top of page

  • For Fixation of extra-articular & simple intra-articular distal tibial fractures.

  • Distal Tibial fractures, percutaneous or reducible by limited arthrotomy.

  • Distal tibial fractures extending into diaphyseal area.

  • Anatomically contoured; plate is twisted 20° and bent to fit the distal tibia.

  • Available for left and right tibias.

  • Limited-contact shaft design with 4 to 14 combination locking/compression holes.

  • Eight distal locking holes accept 2.7 mm cortex, 3.5 mm locking, 3.5 mm cortex, or 4.0 mm cancellous bone screws.

  •  Proximal and distal holes for 1.6 mm or 2.0 mm Kirschner wires.

  •  316L stainless steel or titanium.

  • Locking holes in distal region are parallel to the joint.

  • Elongated hole in shaft aids in initial plate positioning.

  • The shaft holes accept 3.5 mm locking screws in the threaded portion and 3.5 mm cortex screws, 4.0 mm cortex screws and 4.0 mm cancellous bone screws in the compression portion.

  • Distal tab for optional medial malleolus screw accepts 3.5 mm locking, 2.7 mm cortex, 3.5 mm cortex, 4.0 mm cortex or 4.0 mm cancellous bone screw.

      Cat. No.                    Holes            L-R         Length(mm)

  IM-P-L-DTM-05              5 HOLES           L-R               122.0 

  IM-P-L-DTM-07              7 HOLES           L-R               148.0

  IM-P-L-DTM-09              9 HOLES           L-R               174.0

  IM-P-L-DTM-11            11 HOLES           L-R               200.0

  IM-P-L-DTM-13            13 HOLES           L-R               226.0

  IM-P-L-DTM-15            15 HOLES           L-R               252.0 

IMG_20221214_11_edited_edited_edited_edi
  • Facebook
  • Linkedin
bottom of page